Marine Interiors

COLOUR

DESIGN

TECHNICAL CHARACTERISTICS

FEATURES & BENEFITS
- Breathable
- Light Weight
- Quick Dry
- Reversible
- Stays Cool
- Thermal Stability
- Washable
- Water Repellent
(X) Remove FINISHES AND TREATMENTS filter FINISHES AND TREATMENTS
- >100.000 cycles Martindale (EN ISO 12947:1999 Part 2)
- >300.000 cycles Martindale (EN ISO 12947:1999 Part 2) (1)
- 2005/84/EC (phthalates in toys and childcare articles)
- Anti-stain Finish
- Anti-static Finish
- Antibacterial Protection (1)
- Antimycotic Protection
- Cold Crack -23ºC (1)
- Cold Crack -29ºC
- Colour fastness to chlorinated water: EN ISO 105-E02:2010 ≥ 3/5 (Grey Scale)
- Colour fastness to domestic or commercial laundering 30ºC: EN ISO 105-C06, 4-5.
- Colour fastness to domestic or commercial laundering 30ºC: EN ISO 105-C06, 5.
- Colour fastness to rubbing (wet/dry): EN ISO 105-X12, 5
- Colour fastness to sea water: EN ISO 105-E02:2013 ≥ 4/5 (Grey Scale)
- Determination of coating adhesion: 2,5 daN/cm (EN ISO 2411)
- Determination of dimensional change in washing and drying: EN ISO 5077, +/- 0,5%
- Elongation Under Constant Load (Warp/Weft) <1% (PAL-23)
- Elongation Under Constant Load (Warp/Weft) <2% (PAL-23)
- Elongation (warp/weft) 30/25 % (EN ISO 13934-1)
- Elongation (warp/weft) 30/30 % (EN ISO 13934-1)
- EN 71-3 Safety of Toys (Migration of certain elements) (1)
- Mildew resistant backing and face (1)
- Mould Resistance: 0, No growth (AATCC 30-III:2017)
- Mould Resistance: Method B, No growth (ISO 846:2019)
- Pattern with All-Way-Stretch Capabilities
- PERMABLOK3®
- PERMABLOK3® PLUS
- PERMACOOL
- PERMAGUARD®
- Pilling: EN ISO 12945-2 7.000 Cycles, 4-5 (A)
- Pilling: EN ISO 12945-2 7.000 Cycles, 4 (B)
- Protección Antifúngica
- Resistance UV: ISO 105 B04 ≥ 4/5 (Grey Scale)
- Seam resistance (warp/weft) 28/29 daN (EN ISO 13935-2)
- Seam resistance (warp/weft) 30/30 daN (EN ISO 13935-2)
- Sling properties
- Spray test ≥ 70 (EN ISO 4920)
- Sulfide Stain Resistant
- Tearing resistance (warp/weft): 15/15 daN (EN ISO 13937-3)
- Tearing resistance (warp/weft): 20/15 daN (EN ISO 13937-3)
- Tearing resistance (warp/weft): 25/25 daN (EN ISO 13937-3)
- Tensile strength (warp/weft): 165/185 daN/5cm (EN ISO 13434-1)
- Tensile strength (warp/weft): 165/190 daN/5cm (EN ISO 13434-1)
- Thermal Limits: -30ºC / +80ºC (EN 1876-1)
- (X) Remove UV-Resistance: CFFA-2 CA, ASTM-D-4329-05 QUV filter UV-Resistance: CFFA-2 CA, ASTM-D-4329-05 QUV
- UV-resistance: ISO 105 B02 ≥ 7/8 (Blue Wool Scale)
- UV-resistance: ISO 105 B04 ≥ 7/8 (Blue Wool Scale)
FLAME RETARDANCY (1)
- (MED) Marine Equipment Directive (in its current valid version)
- AT: ÖNORM A 3800 Teil 1, Qualmbildungsklasse Q1 - schwachqualmend
- AT: ÖNORM B 3825, Gruppe 1 - Schwerbrennbares Verhalten
- DE: DIN 4102 B1
- DE: DIN 4102 B2
- ECE Regulation No.118:03 (R118.02 Annexes 6, 7 & 8)
- ES: UNE 23.727-90 1R/M.2
- EU: EN 71-2:2006+A1:2007 - Safety of Toys - Parte 2: Flammability (1)
- EU: EN 1021 Part 1 & 2 (1)
- EU: EN 13501 - 1 B s3 d0
- EU: EN 45545-2
- FR: NF D 60-013 (art. AM 18)
- FR: NF P 92-503/M1
- FR: NF P 92-503/M2
- IMO FTP 2010 Code MSC.307 (88) Part 5
- IMO FTP 2010 Code MSC.307 (88) Part 8 3.1 & 3.2 (1)
- IT: UNI 9175 (1987) / UNI 9175/FA1 (1994) Classe 1.IM (UNO I EMME)
- UK: BS 5852 Part 2 CRIB 5
- UK: BS 5852 Part 2 CRIB 7
- UK: BS 7176 Medium Hazard
- US: ASTM E 84 Adhered – Class I (1)
- US: CAL TB 117-2013, Section E (1)
- US: FAR 25/853
- US: FMVSS 302 (1)
- US: NFPA 260 - Class 1 (1)