TECHNICAL CHARACTERISTICS
Colour fastness to chlorinated water: EN ISO 105-E02:2010 ≥ 3/5 (Grey Scale)
Colour fastness to domestic or commercial laundering 30ºC: EN ISO 105-C06, 4-5.
Colour fastness to domestic or commercial laundering 30ºC: EN ISO 105-C06, 5.
Colour fastness to rubbing (wet/dry): EN ISO 105-X12, 5
Colour fastness to sea water: EN ISO 105-E02:2013 ≥ 4/5 (Grey Scale)
Determination of coating adhesion: 2,5 daN/cm (EN ISO 2411)
Determination of dimensional change in washing and drying: EN ISO 5077, +/- 0,5%
Elongation Under Constant Load (Warp/Weft) <1% (PAL-23)
Elongation Under Constant Load (Warp/Weft) <2% (PAL-23)
Elongation (warp/weft) 30/25 % (EN ISO 13934-1)
Elongation (warp/weft) 30/30 % (EN ISO 13934-1)
Mould Resistance: Method B, No growth (ISO 846:2019)
Pattern with All-Way-Stretch Capabilities
Pilling: EN ISO 12945-2 7.000 Cycles, 4-5 (A)
Pilling: EN ISO 12945-2 7.000 Cycles, 4 (B)
Resistencia UV: ISO 105 B04 ≥ 4/5 (Escala de Grises)
Seam resistance (warp/weft) 28/29 daN (EN ISO 13935-2)
Seam resistance (warp/weft) 30/30 daN (EN ISO 13935-2)
Spray test ≥ 70 (EN ISO 4920)
Tearing resistance (warp/weft): 15/15 daN (EN ISO 13937-3)
Tearing resistance (warp/weft): 20/15 daN (EN ISO 13937-3)
Tearing resistance (warp/weft): 25/25 daN (EN ISO 13937-3)
Tensile strength (warp/weft): 165/185 daN/5cm (EN ISO 13434-1)
Tensile strength (warp/weft): 165/190 daN/5cm (EN ISO 13434-1)
Thermal Limits: -30ºC / +80ºC (EN 1876-1)
UV-Resistance: CFFA-2 CA, ASTM-D-4329-05 QUV
UK: BS 7176 Medium Hazard
